Clean the inside of your PS3 - with time, it can get very dusty.When you insert the disc, pick up the front of the PS3 and tilt it backward.If you are encountering this problem, then you can try some of the following solutions: Upload it on a USB, plug it into your PS3, and then go through the described process again. If there is nothing to apply, download it from the official PlayStation website.Plugin your controller (with the USB cable) and press the PS button.Next, press with your finger so you hear 2 consecutive beeps.Hold down the power button until the PS3 turns on and then off again.If you are sure that your discs aren't damaged and the problem occurred after an update, then we recommend trying the following: PS3 doesn't read discs after update: how to fix it? Choose the third option, and follow the procedure to reset your device. If done correctly, your device should launch to a menu. If you do not hear a double-beep, repeat the process.Next, press and hold the On/Off button until you hear two beeps, followed by a double-beep.
A red LED light will indicate the state of your device. Remove any disk from the drive, and put the device in standby mode.If the above methods don't work, you can also try troubleshooting your device: Verify that your region is correctly set and that it is compatible with the disc that you're trying to play.Launch your PlayStation 3, and head to Settings > System Settings > Default Settings.Different disc formats may not be recognized by your PS3. Once that is done, reinsert your disc into the console and attempt to launch it again.Īnother common problem with disc recognition is having your console set to an alternate region.Check both sides of your disc to make sure that it is not scratched or damaged, and then clean your disc carefully using a microfibre cloth.It may seem obvious, but one of the most common reasons for a console's inability to read a disc is disc damage. PS3 not reading discs and makes eject noise fix.
0 kommentar(er)
